ThermoForce is a specially engineered system of four spray nozzles that provide 320% more coverage* for a satisfying drenching effect. The technology optimizes heat through larger nozzle openings that allow for larger droplets to give you an invigorating shower experience you’ll look forward to time and time again.
Larger drops retain heat better to keep you oh-so-toasty.
3X* the coverage for 3X the experience. It's just in our DNA.
Even with great performance we still meet WaterSense regulations.
3X* the coverage than a standard showerhead and bigger water droplets for better heat retention creating a warmer, more satisfying shower.
Bigger water droplets and force for a quick rinse.
Full coverage, bigger water droplets and powerful force for a full body rinse.
Provides a relaxing full coverage experience.
Creates a soothing and refreshing shower experience.
Every Pfister shower head will fit a standard ½ inch-thread shower arm.
Swipe your finger over the easy-to-clean rubber nozzles to wipe away hard water buildup. For a more thorough clean, we recommend soaking your shower head in distilled white vinegar for 30 minutes before rinsing. You can do this using one of the following methods:
**Note – replace old Teflon tape when reinstalling.
**Note – make sure the bag is secured to the shower arm and that the vinegar reaches the shower nozzles.
This eco-friendly method will not only dissolve mineral deposits and disinfect your showerhead but it will also help preserve the metal finish. Use an old toothbrush to brush away any stubborn spots.
If the FAQs do not answer your questions, contact us any time at 1-800-PFAUCET (1-800-732-8238). We’re here to help!