Universal Tub & Shower

Is Your Shower

Universal Tub & Shower fits 8 commonly installed
valves from Pfister®, Delta®, and Moen®.
Follow the 2 steps below to verify that you have the right valve.
QR Code Take this page with you: Scan this QRcode to view this page on your mobile device.
  • Multi-handle tub and showers
  • Showers with volume and temperature control levers
  • Diverters not located on the tub spout
  • If none of these apply to you, continue to Step 1 below.

Step 1: Remove Handle and Flange

To see which valve you have, you will need to remove the handle and flange. Remove the existing trim and clean all mounting surfaces. Make sure the valve stem and all screw holes are free of debris.
Removing your existing handle and
flange is easy.

Removal Tip: Look for a set screw or a removable cap on your existing handle.

Step 2: Verify Valve

Review the valve photos below. If your valve matches one of the photos, then Universal Tub and Shower will work with your existing valve.


Available in a Variety of Styles & Finishes

Sort by:Popular A-Z


Alternate Models:

View Full Details